|
|
|
STEP 1
Insert a thin object under the securing strip and lift it up.
Be careful, it may be very tight.
|
|
|
|
STEP 2
Remove the securing strip.
|
|
|
|
STEP 3
Remove two LCD mask seals.
Remove two screws hidden under seals.
|
|
|
|
STEP 4
Put your fingers between the mask and the LCD screen and carefully release the mask latches.
|
|
|
|
STEP 5
Remove the mask. Do not hurry; twist the mask slightly to release latches.
|
|
|
|
STEP 6
Removed 6 screws securing the LCD screen.
|
|
|
|
STEP 7
Lift the LCD screen off the cover.
Remove the securing tape from the display connector.
Disconnect the display cable.
|
|
|
|
STEP 8
Remove two screws securing the FL inverter.
|
|
|
|
STEP 9
Lift off the FL inverter board.
Disconnect FL inverter cables on both ends.
Remove the FL inverter.
Remove the LCD screen.
|
|
|
|
STEP 10
DONE!
|